5. Partial Calibration

1. In view of the situation where a small number of cameras are accidentally touched or the position is greatly shifted, resulting in poor capture effect, without updating the calibration of all cameras, 1 ~(N-2) cameras can be individually selected for T calibration;

2. Partial calibration only performs T calibration and does not require L calibration;

3. Before partial calibration, you need to set the T calibration parameters and check the camera to be calibrated. After the settings are completed, click "Partial Calibration" to start the T swing process(8.5.1);

4. After wanding, click the 'Calculate' button to compute the calibration results. If the results are not as expected, exclude abnormal factors and click 'Previous Step' to continue T-calibration;

5. After calibration, save the calibration file, switch to the 3D view, and confirm if the capture results have been optimized.

8.5.1