Ensure the dongle is plugged into the operational computer.
When the software is opened without a dongle, a pop-up window prompts and displays the corresponding contact information.
Right-click the "XINGYING" icon on the desktop, and select "Run as administrator" to open the software (3.4.1).
For users who have already calibrated the system and saved the configuration file, you can directly switch the software's working path to the directory where the calibration file is stored. Click on "File - Load Calibration File", and select the .cal configuration file in the pop-up window to load. After successfully loading the calibration file, click on the first button from left to right at the bottom of the software to connect the camera. Wait for 1~2s, and a pop-up window will prompt you to confirm the number of cameras connected. Click on the second play button from left to right at the bottom of the interface to start the camera.
After loading the calibration file, you can directly connect the camera for subsequent use of the software, as long as the working directory is not changed and the configuration file exists, the software will automatically load the configuration file.
