Other Configurations

  1. After setting the force plate parameters, check "Use Force Threshold" in the "Noise Filters" module and set the value to "5" to filter out noise on the force plate in the 3D view.

  2. Set the channel magnification by opening the Force Platform Configuration window, entering the frame rate multiplier at the bottom, and pressing Enter. The magnification setting will be successful. Sampling frequency value = frame rate multiplier × frame rate,The maximum value for the ampling frequency limit is 2000.

  3. Force Platform COP Limit: After setting the limit in the software, the force column will not exceed the size of the force platform. The unit of measurement for the set value is in millimeters. The COP limit function is available for all force platforms.

  4. After setting the COP limit, modifying the limit in the recorded COP data requires pausing the playback. The COP function switch is enabled by default, with a default value of 0. If the recorded data does not contain it, the force platform limit value function can also be used in post-processing. If real-time recording includes COP limit, the exported file data will also contain it.

PreviousForce and TorqueNextEMG