3. AI Settings

Click on the Settings button on the toolbar above and select "AI Settings" (7.3.1);

  1. **Speech Recognition:**Select the "Speech recognition" checkbox, and the software can recognize language commands issued by the user, such as "Connect the camera, start play, disconnect the camera". After successful recognition, the software will automatically execute the corresponding commands.

  2. **Voice prompt:**Check the 'Voice prompt' and the software will provide voice prompts when users operate on the software.

  3. **Auto execute:**Check the automatic execution. After the software restarts, it will automatically execute the operation of "connect", "load markerset"and "play" commands.

  4. **Minimize to Tray:**Check the "Minimize to Tray" function, and the software will automatically minimize to the system tray in the lower left corner of the desktop after startup. Only after checked the "Auto Execute" function "Minimize to Tray" function can take effect.

  5. Exit Confirmation: Enabled by default; When turn off this function, close the software and exit immediately without pop-up confirmation.

  6. Start Log: Enable the log function, which is enabled by default. To disable the log function, you can modify the settings below.

  7. Log File Size: The amount of storage taken up by the logs in the system.

  8. Log Save Path: The specific location where log files are stored. The file path can be modified.

  9. Automatic Clearing: The system automatically removes older logs once they have been stored for a specified number of days.